JEEP JK UNLIMITED 07-18 4" X-SERIES SUSPENSION LIFT KIT

COMPONENTS

• Lifted coil springs
• Upper adjustable control arms
• Lower adjustable control arms
• Sway-bar quick disconnects
• Forged adjustable track bar
• Stainless steel braided brake lines
• Shock relocation brackets
• Hardware

• Lifted coil springs
• Upper adjustable control arms
• Lower adjustable control arms
• Coil correction plates
• Track bar drop bracket
• Extended sway-bar links
• Stainless steel braided brake lines
• Hardware

• (4) Performance 2.2 Series

FEATURES

• Easy bolt-on installation
• Increased ground clearance
• Levels the front with the rear of the vehicle
• Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.
• Includes our High Performance 2.2 series shock absorbers.
• X-Flex control arm features:
• Clevite brand OEM style rubber bushings.
• Flex joints are fully rebuildable.
• Flex joints feature a massive 2.5" diameter body and 1.25" thread.
• Fully greasable.
• Adjustable retainer ring.

SPECS

• Install Time: 4-5 hours 
• Tires: 35x12.50 R17 
• Wheel BS: 4.5" - 4.75" 
• View Instructions

NOTES

• Does NOT fit 2-door models.
• 2012-up models require exhaust modifications to clear the front driveshaft. (#1030) - Available below or here
• On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.