WHEEL SPACER COLORADO 15-21 1.5" M14X1.5 6X120

Description

WHEEL SPACER COLORADO 15-21 1. 5" M14X1. 5 6X120

Notes

Sold in pairs

Important

Clean the surface where the wheel spacer will be mounted and the back of the wheel. Remove the rotor/drum retainer clips if applicable. All surfaces must be clean so the wheel spacer sits perfectly flat on the vehicle mounting surface. If surface is not clean, wheel vibration will occur. Use the provided lug nuts to install the spacers on the vehicle. With a torque wrench, tighten the lug nuts to vehicle's specifications. Do not apply anti-seize. Do not use air tools. If the vehicle's wheel studs are longer than the spacer's thickness, you might have to cut the factory studs to allow the wheels to sit perfectly flat on the spacers. Install the wheels on the spacers using vehicle's lug nuts. Torque the lug nuts to 110 Ibs/ft, not to factory specs. Do not over-tighten. Again, make sure the wheels sit perfectly flat to the hubs. Check the tightness of the lug nuts after the vehicle has been driven 100km. Wheel spacers are not approved to use on public roads or towing. For Off-road use only